Newsgroups: comp.sources.unix From: spaf@cs.purdue.edu (Gene Spafford) Subject: v26i180: tripwire - security integrity monitor, Part08/08 Sender: unix-sources-moderator@vix.com Approved: paul@vix.com Submitted-By: spaf@cs.purdue.edu (Gene Spafford) Posting-Number: Volume 26, Issue 180 Archive-Name: tripwire/part08 #! /bin/sh # This is a shell archive. Remove anything before this line, then unpack # it by saving it into a file and typing "sh file". To overwrite existing # files, type "sh file -c". You can also feed this as standard input via # unshar, or by typing "sh 'tripwire-1.0/src/dbase.update.c' <<'END_OF_FILE' X#ifndef lint Xstatic char rcsid[] = "$Id: dbase.update.c,v 1.2 92/11/03 02:43:43 genek Exp $"; X#endif X X/* X * dbase.update.c X * X * build the preen.database file with the list of files that X * was generated by config.parse.c X * X * Gene Kim X * Purdue University X */ X X#include "../include/config.h" X#include X#include X#ifdef STDLIBH X# include X#endif X#include X#include X#include X#ifdef STRINGH X#include X#else X#include X#endif X#include X#include "../include/list.h" X#include "../include/tripwire.h" X X/* X * database_update_markentries (struct list **pp_list, int flagentry) X * X * mark all entries with the given (flagentry) as FLAG_UPDATE. X */ X Xvoid Xdatabase_update_markentries (pp_list, flagentry) X struct list **pp_list; X int flagentry; X{ X struct list_elem *p_fileentry; X char trash[1024]; X int entry; X int err; X X /* use pp_list as key */ X if (list_open(pp_list) < 0) { X fputs("database_update: list_open() failed!\n", stderr); X exit(1); X } X X /* foreach file entry */ X while ((p_fileentry = list_get(pp_list)) != NULL) { X if ((err = sscanf(p_fileentry->varvalue, "%d %s", &entry, trash)) < 2) { X fprintf(stderr, "database_update: sscanf() parse error, returned %d!\n", err); X exit(1); X } X /* flag if entry number match */ X if (entry == flagentry) { X list_setflag(p_fileentry->varname, FLAG_UPDATE, pp_list); X } X } X X /* close up the list */ X if (list_close(pp_list) < 0) { X fputs("database_update: list_close() failed!\n", stderr); X exit(1); X } X} X END_OF_FILE if test 1599 -ne `wc -c <'tripwire-1.0/src/dbase.update.c'`; then echo shar: \"'tripwire-1.0/src/dbase.update.c'\" unpacked with wrong size! fi # end of 'tripwire-1.0/src/dbase.update.c' fi if test -f 'tripwire-1.0/include/list.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/include/list.h'\" else echo shar: Extracting \"'tripwire-1.0/include/list.h'\" \(1541 characters\) sed "s/^X//" >'tripwire-1.0/include/list.h' <<'END_OF_FILE' X/* $Id: list.h,v 1.1.1.2 92/11/02 18:19:38 genek Exp $ */ X X#define LIST_HASHSZ 17011 X X/* linked list element */ Xstruct list_elem { X char *varname; X char *varvalue; X int priority; X struct list_elem *next; X struct list_elem *prev; X int flag; X}; X X/* hash table structure */ Xstruct list_hash { X char *key; /* hashed string */ X int used; /* table used or not */ X struct list_elem *lptr; /* pointer to entry on list */ X struct list_hash *next; /* pointer to next entry on chain */ X}; X X/* linked list pointer, with head and tail */ Xstruct list { X struct list_elem *p_head; X struct list_elem *p_tail; X struct list_hash hashtable[LIST_HASHSZ]; X}; X X/* prototypes */ X/* Do not remove this line. Protyping depends on it! */ X#if defined(__STDC__) || defined(__cplusplus) X#define P_(s) s X#else X#define P_(s) () X#endif X X/* list.c */ Xvoid list_set P_((char *pc_name, char *pc_value, int priority, struct list **pp_list)); Xchar *list_lookup P_((char *pc_name, struct list **pp_list)); Xint list_isthere P_((char *pc_name, struct list **pp_list)); Xvoid list_unset P_((char *pc_name, struct list **pp_list)); Xint list_setflag P_((char *pc_name, int flag, struct list **pp_list)); Xint list_getflag P_((char *pc_name, struct list **pp_list)); Xvoid list_print P_((struct list **pp_list)); Xvoid list_reset P_((struct list **pp_list)); Xint list_init P_((void)); Xint list_open P_((struct list **pp_list)); Xstruct list_elem *list_get P_((struct list **pp_list)); Xint list_close P_((struct list **pp_list)); X X#undef P_ END_OF_FILE if test 1541 -ne `wc -c <'tripwire-1.0/include/list.h'`; then echo shar: \"'tripwire-1.0/include/list.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/include/list.h' fi if test -f 'tripwire-1.0/aux/types.c' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/aux/types.c'\" else echo shar: Extracting \"'tripwire-1.0/aux/types.c'\" \(1419 characters\) sed "s/^X//" >'tripwire-1.0/aux/types.c' <<'END_OF_FILE' X#ifndef lint Xstatic char rcsid[] = "$Id: types.c,v 1.2 92/11/03 02:48:33 genek Exp $"; X#endif X X#include "../include/config.h" X#include X#include X#include X#ifdef STDLIBH X#include X#endif X Xstatic void Xusage() X{ X fputs("types: usage: typename\n", stderr); X exit(1); X} X Xchar *pc; Xint isunsigned; X Xmain(argc, argv) X int argc; X char *argv[]; X{ X struct stat statbuf; X int size; X X pc = argv[1]; X X if (argc < 2) X usage(); X X if (strcmp(pc, "mode_t") == 0) { X isunsigned = 1; X typeis(sizeof(statbuf.st_mode)); X } X else if (strcmp(pc, "ino_t") == 0) { X isunsigned = 1; X typeis(sizeof(statbuf.st_ino)); X } X else if (strcmp(pc, "nlink_t") == 0) { X isunsigned = 1; X typeis(sizeof(statbuf.st_nlink)); X } X else if (strcmp(pc, "uid_t") == 0) { X isunsigned = 0; X typeis(sizeof(statbuf.st_uid)); X } X else if (strcmp(pc, "gid_t") == 0) { X isunsigned = 0; X typeis(sizeof(statbuf.st_gid)); X } X else if (strcmp(pc, "off_t") == 0) { X isunsigned = 1; X typeis(sizeof(statbuf.st_size)); X } X X exit(0); X X} X Xtypeis(i) X int i; X{ X int shortlen = sizeof(unsigned short); X int longlen = sizeof(unsigned long); X char sign[64]; X X if (isunsigned) X strcpy(sign, "unsigned"); X else X strcpy(sign, "signed"); X X X if (i == shortlen) X printf("typedef %s short %s;\n", sign, pc); X else X printf("typedef %s long %s;\n", sign, pc); X} END_OF_FILE if test 1419 -ne `wc -c <'tripwire-1.0/aux/types.c'`; then echo shar: \"'tripwire-1.0/aux/types.c'\" unpacked with wrong size! fi # end of 'tripwire-1.0/aux/types.c' fi if test -f 'tripwire-1.0/tests/test1.sh' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/tests/test1.sh'\" else echo shar: Extracting \"'tripwire-1.0/tests/test1.sh'\" \(1412 characters\) sed "s/^X//" >'tripwire-1.0/tests/test1.sh' <<'END_OF_FILE' X#!/bin/sh X X# $Id: test1.sh,v 1.4 92/11/03 13:36:36 genek Exp $ X XHOSTNAME=$1 XDIST=$2 X Xcat << 'GHK' X X=== X X This shell script tests all the Tripwire signature routines. XConsequently, this test may take awhile to complete, since even the Xslowest signature routines are exercised. On a Sequent Symmetry Xrunning 16 Mhz Intel 80386s, this test takes over five minutes to Xcomplete. X X This same test using only the MD5 routines completes in less Xthan 30 seconds. X X This test suite will ascertain whether the byte-ordering and Xmachine-dependent routines are working correctly. X XGHK X Xecho "=== test begin ===" Xecho '' X Xecho creating: ./tw.db_TEST.@ Xecho creating: ./@tw.config X XHOST=`$HOSTNAME` XCURRPATH=`pwd` XCURRPATH=`echo $CURRPATH | sed s,/tests$,,` X Xsed s,/tmp/genek/$DIST,$CURRPATH, < ./tw.db_TEST > ./tw.db_TEST.@; Xsed s,/tmp/genek/$DIST,$CURRPATH, < ./tw.conf.test > ./@tw.config; X X../src/tripwire -c ./@tw.config -d ./tw.db_TEST.@; X Xecho === test end === ; Xecho '' X Xecho Tripwire should have only reported: Xecho " added: $CURRPATH/tests/@tw.config" Xecho " $CURRPATH/tests/tw.db_TEST.@... " Xecho " $CURRPATH/databases/... " Xecho " changed: $CURRPATH/... (maybe some directory sizes...) " Xecho " ...and any other files you may have changed!" Xecho '' Xecho '' Xecho removing: ./tests/tw.db_TEST.@ Xecho removing: @tw.config Xrm ./tw.db_TEST.@ Xrm ./@tw.config END_OF_FILE if test 1412 -ne `wc -c <'tripwire-1.0/tests/test1.sh'`; then echo shar: \"'tripwire-1.0/tests/test1.sh'\" unpacked with wrong size! fi # end of 'tripwire-1.0/tests/test1.sh' fi if test -f 'tripwire-1.0/sigs/md2/md2.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/sigs/md2/md2.h'\" else echo shar: Extracting \"'tripwire-1.0/sigs/md2/md2.h'\" \(1216 characters\) sed "s/^X//" >'tripwire-1.0/sigs/md2/md2.h' <<'END_OF_FILE' X/* $Id: md2.h,v 1.1.1.2 92/11/02 18:21:27 genek Exp $ */ X X/* MD2.H - header file for MD2C.C X */ X X/* Copyright (C) 1990-2, RSA Data Security, Inc. Created 1990. All X rights reserved. X X License to copy and use this software is granted for X non-commercial Internet Privacy-Enhanced Mail provided that it is X identified as the "RSA Data Security, Inc. MD2 Message Digest X Algorithm" in all material mentioning or referencing this software X or this function. X X RSA Data Security, Inc. makes no representations concerning either X the merchantability of this software or the suitability of this X software for any particular purpose. It is provided "as is" X without express or implied warranty of any kind. X X These notices must be retained in any copies of any part of this X documentation and/or software. X */ X X X Xtypedef struct { X unsigned char state[16]; /* state */ X unsigned char checksum[16]; /* checksum */ X unsigned int count; /* number of bytes, modulo 16 */ X unsigned char buffer[16]; /* input buffer */ X} MD2_CTX; X Xvoid MD2Init (); Xvoid MD2Update (); Xvoid MD2Final (); X Xint sig_md2_get(); END_OF_FILE if test 1216 -ne `wc -c <'tripwire-1.0/sigs/md2/md2.h'`; then echo shar: \"'tripwire-1.0/sigs/md2/md2.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/sigs/md2/md2.h' fi if test -f 'tripwire-1.0/contrib/README.CheckConfig' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/contrib/README.CheckConfig'\" else echo shar: Extracting \"'tripwire-1.0/contrib/README.CheckConfig'\" \(1216 characters\) sed "s/^X//" >'tripwire-1.0/contrib/README.CheckConfig' <<'END_OF_FILE' XCheckConfig X XArguably THE most important step in using tripwire on your system is the Xcreation of a config file for the host. The config file for you machine must Xreflect vendor as well as local file structure conventions. X XFor example on suns, /var and /usr are functionally equivelent, except with Xtripwire which cares that one is a symlink to the other. Some vendors (NeXT) Xput network tools such as nslookup in /usr/etc while other vendors (HP) put Xthem in /usr/bin X XOn some installations, the convention is to fill /usr/local with new code, on Xsome locations /usr/local is full of symlinks which point to new code, some Xlocations might decide to put new code in /Local. X XSince the config file MUST match the flavour of your system, CheckConfig was Xcreated to parse the tripwire.config file and report anomilies. X Xusage:: CheckConfig [-v] file X XIn non-verbose mode, CheckConfig reports merely on the existance of symbolic Xlinks in the file. This warns you that a symlink instead of a directory Xhierarchy or file is being monitored by tripwire. X XIn verbose mode, CheckConfig also shouts about non-existant files and lists Xall other entries as either directories or files. X XLance Bailey X END_OF_FILE if test 1216 -ne `wc -c <'tripwire-1.0/contrib/README.CheckConfig'`; then echo shar: \"'tripwire-1.0/contrib/README.CheckConfig'\" unpacked with wrong size! fi # end of 'tripwire-1.0/contrib/README.CheckConfig' fi if test -f 'tripwire-1.0/aux/types.sh' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/aux/types.sh'\" else echo shar: Extracting \"'tripwire-1.0/aux/types.sh'\" \(1153 characters\) sed "s/^X//" >'tripwire-1.0/aux/types.sh' <<'END_OF_FILE' X#!/bin/sh X X# $Id: types.sh,v 1.1.1.1 92/11/02 17:45:16 genek Exp $ X X# types.sh X# X# glean any missing struct stat typedefs. X# X# Gene Kim X# Purdue University X# October 18, 1992 X Xif test ! -x ./types Xthen X echo "You must do 'make' first!" X exit 1 Xfi X XCPP=${1?"Run from the makefile!"} X XTYPES=./ourtypes.h X X# build our own local copy of types.h X Xcat > gettypes.c << 'GHK' X#include X#include XGHK X$CPP gettypes.c > $TYPES Xrm -f gettypes.c X X# print out banner for inode.h X Xcat << 'GHK' X/* X * inode.h X * X * Do not modify this file. This file was automatically X * generated by the Tripwire makefile. X * X */ X XGHK X X# now start finding the missing typedefs X Xgrep mode_t $TYPES > /dev/null Xif [ $? -ne 0 ] Xthen X ./types mode_t; Xfi X Xgrep ino_t $TYPES > /dev/null Xif [ $? -ne 0 ] Xthen X ./types ino_t; Xfi X Xgrep nlink_t $TYPES > /dev/null Xif [ $? -ne 0 ] Xthen X ./types nlink_t; Xfi X Xgrep uid_t $TYPES > /dev/null Xif [ $? -ne 0 ] Xthen X ./types uid_t; Xfi X Xgrep gid_t $TYPES > /dev/null Xif [ $? -ne 0 ] Xthen X ./types gid_t; Xfi X Xgrep off_t $TYPES > /dev/null Xif [ $? -ne 0 ] Xthen X ./types off_t; Xfi X Xrm $TYPES X Xexit 0; END_OF_FILE if test 1153 -ne `wc -c <'tripwire-1.0/aux/types.sh'`; then echo shar: \"'tripwire-1.0/aux/types.sh'\" unpacked with wrong size! fi chmod +x 'tripwire-1.0/aux/types.sh' # end of 'tripwire-1.0/aux/types.sh' fi if test -f 'tripwire-1.0/configs/conf-mach.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-mach.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-mach.h'\" \(1119 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-mach.h' <<'END_OF_FILE' X/* $Id: conf-mach.h,v 1.1.1.3 92/11/03 15:38:03 genek Exp $ */ X X/* X * conf-mach.h X * X * Tripwire configuration file X * X * Peter Shipley X * TFS (TRW Financial Systems) X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#undef SYSV X X/* X * does your system have a like System V? X */ X X#undef MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#undef STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X/* MACH has readdir(3) but no include file */ X#undef DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#define GETHOSTNAME X X X/* X * miscellaneous stuff X */ X X#define MACH 1 X X/* MACH seems to be missing the define for S_IFIFO [but is had S_ISFIFO() ] */ X#ifndef S_IFIFO X#define S_IFIFO 0010000 X#endif X X END_OF_FILE if test 1119 -ne `wc -c <'tripwire-1.0/configs/conf-mach.h'`; then echo shar: \"'tripwire-1.0/configs/conf-mach.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-mach.h' fi if test -f 'tripwire-1.0/configs/conf-unicos.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-unicos.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-unicos.h'\" \(1034 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-unicos.h' <<'END_OF_FILE' X/* $Id: conf-unicos.h,v 1.1.1.3 92/11/03 15:39:37 genek Exp $ */ X X/* X * conf-unicos.h X * X * Tripwire configuration file X * X * Gene Kim X * Purdue University X * X * Unicos port by: X * Michael Barnett X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#define SYSV 3 X X/* X * does your system have a like System V? X */ X X#define MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#define STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#define DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#undef GETHOSTNAME X X/* X * miscallaneous stuff -mnb X */ X X#define UNICOS X#define MAXPATHLEN PATH_MAX END_OF_FILE if test 1034 -ne `wc -c <'tripwire-1.0/configs/conf-unicos.h'`; then echo shar: \"'tripwire-1.0/configs/conf-unicos.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-unicos.h' fi if test -f 'tripwire-1.0/sigs/md5/md5.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/sigs/md5/md5.h'\" else echo shar: Extracting \"'tripwire-1.0/sigs/md5/md5.h'\" \(1019 characters\) sed "s/^X//" >'tripwire-1.0/sigs/md5/md5.h' <<'END_OF_FILE' X/*********************************************************************** X ** md5.h -- header file for implementation of MD5 ** X ** RSA Data Security, Inc. MD5 Message-Digest Algorithm ** X ** Created: 2/17/90 RLR ** X ** Revised: 12/27/90 SRD,AJ,BSK,JT Reference C version ** X ** Revised (for MD5): RLR 4/27/91 ** X **********************************************************************/ X/* typedef a 32-bit type */ Xtypedef unsigned long int UINT4; X X/* Data structure for MD5 (Message-Digest) computation */ Xtypedef struct { X UINT4 i[2]; /* number of _bits_ handled mod 2^64 */ X UINT4 buf[4]; /* scratch buffer */ X unsigned char in[64]; /* input buffer */ X unsigned char digest[16]; /* actual digest after MD5Final call */ X} MD5_CTX; X Xvoid MD5Init(); Xvoid MD5Update(); Xvoid MD5Final(); X Xint sig_md5_get(); END_OF_FILE if test 1019 -ne `wc -c <'tripwire-1.0/sigs/md5/md5.h'`; then echo shar: \"'tripwire-1.0/sigs/md5/md5.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/sigs/md5/md5.h' fi if test -f 'tripwire-1.0/configs/conf-umaxv.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-umaxv.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-umaxv.h'\" \(1019 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-umaxv.h' <<'END_OF_FILE' X/* $Id: conf-umaxv.h,v 1.1.1.3 92/11/03 15:39:28 genek Exp $ */ X X/* X * conf-umaxv.h X * X * Tripwire configuration file X * X * Gene Kim X * Purdue University X * X * Modified by Michael Barnett (mikeb@rmit.edu.au) for UMAX V R2.4.1. X * X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#define SYSV 2 X X/* X * does your system have a like System V? X */ X X#define MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#undef STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#define DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#undef GETHOSTNAME X X/* X * miscellaneous stuff - mnb X */ X X#define MAXPATHLEN PATH_MAX END_OF_FILE if test 1019 -ne `wc -c <'tripwire-1.0/configs/conf-umaxv.h'`; then echo shar: \"'tripwire-1.0/configs/conf-umaxv.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-umaxv.h' fi if test -f 'tripwire-1.0/configs/conf-aux3.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-aux3.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-aux3.h'\" \(1014 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-aux3.h' <<'END_OF_FILE' X/* $Id: conf-aux3.h,v 1.1.1.3 92/11/03 15:37:27 genek Exp $ */ X X/* X * conf-aux3.h X * X * Tripwire configuration file X * X * Gene Kim X * Purdue University X * X * A/UX port provided by: X * Phillip Porch (root@raidernet.com) X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#define SYSV 2 X X/* X * does your system have a like System V? X */ X X#define MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X/* #define STDLIBH */ X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#define DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#undef GETHOSTNAME X X/* X * missing defines X */ X X/* #define MAXPATHLEN PATH_MAX */ X END_OF_FILE if test 1014 -ne `wc -c <'tripwire-1.0/configs/conf-aux3.h'`; then echo shar: \"'tripwire-1.0/configs/conf-aux3.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-aux3.h' fi if test -f 'tripwire-1.0/configs/conf-hpux.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-hpux.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-hpux.h'\" \(995 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-hpux.h' <<'END_OF_FILE' X/* $Id: conf-hpux.h,v 1.1.1.3 92/11/03 15:37:52 genek Exp $ */ X X/* X * conf-hpux.h X * X * Tripwire configuration file X * X * Gene Kim X * Purdue University X * X * HP/UX port by: X * Lance Bailey X */ X X#define _HPUX_SOURCE X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#undef SYSV X X/* X * does your system have a like System V? X */ X X#define MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#define STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#define DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#define GETHOSTNAME END_OF_FILE if test 995 -ne `wc -c <'tripwire-1.0/configs/conf-hpux.h'`; then echo shar: \"'tripwire-1.0/configs/conf-hpux.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-hpux.h' fi if test -f 'tripwire-1.0/src/nullsig.c' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/src/nullsig.c'\" else echo shar: Extracting \"'tripwire-1.0/src/nullsig.c'\" \(992 characters\) sed "s/^X//" >'tripwire-1.0/src/nullsig.c' <<'END_OF_FILE' X#ifndef lint Xstatic char rcsid[] = "$Id: nullsig.c,v 1.2 92/11/03 02:43:55 genek Exp $"; X#endif X X/* X * nullsig.c X * X * hook for null signature X * X * Gene Kim X * Purdue University X */ X X#include "../include/config.h" X#include X#ifdef STDLIBH X#include X#include X#endif X#include X#include X#include "../include/tripwire.h" X#include "../include/sigs.h" X X/* X * int X * pf_signature(int fd_in, char *ps_signature, int siglen) X * X * fd_in: pointer to input file descriptor X * ps_signature: pointer to array where signature will be stored X * siglen: length of the signature array (for overflow checking) X */ X Xint Xsig_null_get (fd_in, ps_signature, siglen) X int fd_in; X char *ps_signature; X int siglen; X{ X /* rewind the file descriptor */ X if (lseek(fd_in, 0, SEEK_SET) < 0) { X die_with_err("sig_null_get: lseek()", (char *) NULL); X } X X /* lint pacifier */ X siglen += 0; X X sprintf(ps_signature, "0"); X return 0; X} END_OF_FILE if test 992 -ne `wc -c <'tripwire-1.0/src/nullsig.c'`; then echo shar: \"'tripwire-1.0/src/nullsig.c'\" unpacked with wrong size! fi # end of 'tripwire-1.0/src/nullsig.c' fi if test -f 'tripwire-1.0/configs/conf-aix.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-aix.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-aix.h'\" \(985 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-aix.h' <<'END_OF_FILE' X/* $Id: conf-aix.h,v 1.1.1.3 92/11/03 15:37:20 genek Exp $ */ X X/* X * conf-aix.h X * X * Tripwire configuration file X * X * Gene Kim X * Purdue University X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#undef SYSV X X/* X * does your system have a like System V? X */ X X#undef MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#undef STDLIBH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#define GETHOSTNAME X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#define DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH X X/* X * miscellaneous stuff X * X * AIX redefines much of typedefs as unsigned longs. X */ X X#define AIX END_OF_FILE if test 985 -ne `wc -c <'tripwire-1.0/configs/conf-aix.h'`; then echo shar: \"'tripwire-1.0/configs/conf-aix.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-aix.h' fi if test -f 'tripwire-1.0/configs/conf-xenix.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-xenix.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-xenix.h'\" \(977 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-xenix.h' <<'END_OF_FILE' X/* $Id: conf-xenix.h,v 1.1.1.3 92/11/03 15:39:45 genek Exp $ */ X X/* X * conf-xenix.h X * X * Tripwire configuration file X * X * Gene Kim X * Purdue University X * X * Xenix port by: X * Daniel Ray X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#define SYSV 3 X X/* X * does your system have a like System V? X */ X X#define MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#define STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#undef DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#undef GETHOSTNAME X X/* X * miscallaneous stuff X */ X X#define XENIX END_OF_FILE if test 977 -ne `wc -c <'tripwire-1.0/configs/conf-xenix.h'`; then echo shar: \"'tripwire-1.0/configs/conf-xenix.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-xenix.h' fi if test -f 'tripwire-1.0/configs/conf-convex.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-convex.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-convex.h'\" \(961 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-convex.h' <<'END_OF_FILE' X/* $Id: conf-convex.h,v 1.1.1.3 92/11/03 15:37:36 genek Exp $ */ X X/* X * conf-convex.h X * X * Tripwire configuration file X * X * Gene Kim X * Purdue University X * X * Ported to COnvexos 9.1 X * by Adrian P van Bloois at ACCU X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#undef SYSV X X/* X * does your system have a like System V? X */ X X#undef MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#define STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#define DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#define GETHOSTNAME END_OF_FILE if test 961 -ne `wc -c <'tripwire-1.0/configs/conf-convex.h'`; then echo shar: \"'tripwire-1.0/configs/conf-convex.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-convex.h' fi if test -f 'tripwire-1.0/configs/conf-riscos.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-riscos.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-riscos.h'\" \(960 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-riscos.h' <<'END_OF_FILE' X/* $Id: conf-riscos.h,v 1.1.1.3 92/11/03 15:38:43 genek Exp $ */ X X/* X * conf-riscos4.h (for SYSTYPE_BSD43) X * X * Tripwire configuration file X * X * Gene Kim X * Purdue University X * X * Ported to RiscOS X * Harlan Stenn X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#undef SYSV X X/* X * does your system have a like System V? X */ X X#undef MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#undef STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#undef DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#define GETHOSTNAME END_OF_FILE if test 960 -ne `wc -c <'tripwire-1.0/configs/conf-riscos.h'`; then echo shar: \"'tripwire-1.0/configs/conf-riscos.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-riscos.h' fi if test -f 'tripwire-1.0/configs/conf-irix4.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-irix4.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-irix4.h'\" \(951 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-irix4.h' <<'END_OF_FILE' X/* $Id: conf-irix4.h,v 1.1.1.3 92/11/03 15:37:56 genek Exp $ */ X X/* X * conf-irix4.h X * X * Tripwire configuration file X * X * Gene Kim X * Purdue University X * X * IRIX4 port by: X * Simon Leinen X * Ecole Polytechnique Federale de Lausanne X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#define SYSV 3 X X/* X * does your system have a like System V? X */ X X#define MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#define STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#define DIRENT X X/* X * does your system have lstat() X */ X#define HAVE_LSTAT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH END_OF_FILE if test 951 -ne `wc -c <'tripwire-1.0/configs/conf-irix4.h'`; then echo shar: \"'tripwire-1.0/configs/conf-irix4.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-irix4.h' fi if test -f 'tripwire-1.0/configs/conf-svr3.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-svr3.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-svr3.h'\" \(936 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-svr3.h' <<'END_OF_FILE' X/* $Id: conf-svr3.h,v 1.1.1.3 92/11/03 15:39:10 genek Exp $ */ X X/* X * conf-svr3.h X * X * Tripwire configuration file X * X * Gene Kim X * Purdue University X * X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#define SYSV 3 X X/* X * does your system have a like System V? X */ X X#define MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#define STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#define DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#undef GETHOSTNAME X X/* X * missing defines X */ X X#define MAXPATHLEN PATH_MAX END_OF_FILE if test 936 -ne `wc -c <'tripwire-1.0/configs/conf-svr3.h'`; then echo shar: \"'tripwire-1.0/configs/conf-svr3.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-svr3.h' fi if test -f 'tripwire-1.0/configs/conf-osf1.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-osf1.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-osf1.h'\" \(921 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-osf1.h' <<'END_OF_FILE' X/* $Id: conf-osf1.h,v 1.1.1.3 92/11/03 15:38:10 genek Exp $ */ X X/* X * conf-osf1.h X * X * Tripwire configuration file X * X * Gene Kim X * Purdue University X * X * OSF/1 port by: X * Rich Salz X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#undef SYSV X X/* X * does your system have a like System V? X */ X X#undef MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#undef STDLIBH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#define GETHOSTNAME X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#define DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH END_OF_FILE if test 921 -ne `wc -c <'tripwire-1.0/configs/conf-osf1.h'`; then echo shar: \"'tripwire-1.0/configs/conf-osf1.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-osf1.h' fi if test -f 'tripwire-1.0/configs/conf-sunos-4.0.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-sunos-4.0.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-sunos-4.0.h'\" \(914 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-sunos-4.0.h' <<'END_OF_FILE' X/* $Id: conf-sunos-4.0.h,v 1.1.1.3 92/11/03 15:38:57 genek Exp $ */ X X/* X * conf-sunos-4.0.h (SunOS versions prior to 4.1) X * X * Tripwire configuration file X * X * Gene Kim X * Purdue University X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#undef SYSV X X/* X * does your system have a like System V? X */ X X#define MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#undef STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#define DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#define GETHOSTNAME END_OF_FILE if test 914 -ne `wc -c <'tripwire-1.0/configs/conf-sunos-4.0.h'`; then echo shar: \"'tripwire-1.0/configs/conf-sunos-4.0.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-sunos-4.0.h' fi if test -f 'tripwire-1.0/configs/conf-sunos-4.1.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-sunos-4.1.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-sunos-4.1.h'\" \(909 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-sunos-4.1.h' <<'END_OF_FILE' X/* $Id: conf-sunos-4.1.h,v 1.1.1.3 92/11/03 15:39:03 genek Exp $ */ X X/* X * conf-sunos-4.1.h (SunOS versions >= 4.1) X * X * Tripwire configuration file X * X * Gene Kim X * Purdue University X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#undef SYSV X X/* X * does your system have a like System V? X */ X X#define MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#define STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#define DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#define GETHOSTNAME END_OF_FILE if test 909 -ne `wc -c <'tripwire-1.0/configs/conf-sunos-4.1.h'`; then echo shar: \"'tripwire-1.0/configs/conf-sunos-4.1.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-sunos-4.1.h' fi if test -f 'tripwire-1.0/configs/conf-svr4.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-svr4.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-svr4.h'\" \(876 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-svr4.h' <<'END_OF_FILE' X/* $Id: conf-svr4.h,v 1.1.1.3 92/11/03 15:39:18 genek Exp $ */ X X/* X * conf-svr4.h X * X * Tripwire configuration file X * X * Gene Kim X * Purdue University X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#define SYSV 4 X X/* X * does your system have a like System V? X */ X X#define MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#define STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#define DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#undef GETHOSTNAME END_OF_FILE if test 876 -ne `wc -c <'tripwire-1.0/configs/conf-svr4.h'`; then echo shar: \"'tripwire-1.0/configs/conf-svr4.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-svr4.h' fi if test -f 'tripwire-1.0/configs/conf-dynix.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-dynix.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-dynix.h'\" \(873 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-dynix.h' <<'END_OF_FILE' X/* $Id: conf-dynix.h,v 1.1.1.3 92/11/03 15:37:43 genek Exp $ */ X X/* X * conf-dynix.h X * X * Tripwire configuration file X * X * Gene Kim X * Purdue University X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#undef SYSV X X/* X * does your system have a like System V? X */ X X#undef MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#undef STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#undef DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#define GETHOSTNAME END_OF_FILE if test 873 -ne `wc -c <'tripwire-1.0/configs/conf-dynix.h'`; then echo shar: \"'tripwire-1.0/configs/conf-dynix.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-dynix.h' fi if test -f 'tripwire-1.0/configs/conf-bsd.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-bsd.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-bsd.h'\" \(869 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-bsd.h' <<'END_OF_FILE' X/* $Id: conf-bsd.h,v 1.1.1.3 92/11/03 15:37:31 genek Exp $ */ X X/* X * conf-bsd.h X * X * Tripwire configuration file X * X * Gene Kim X * Purdue University X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#undef SYSV X X/* X * does your system have a like System V? X */ X X#undef MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#undef STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#undef DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#define GETHOSTNAME END_OF_FILE if test 869 -ne `wc -c <'tripwire-1.0/configs/conf-bsd.h'`; then echo shar: \"'tripwire-1.0/configs/conf-bsd.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-bsd.h' fi if test -f 'tripwire-1.0/sigs/md2/global.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/sigs/md2/global.h'\" else echo shar: Extracting \"'tripwire-1.0/sigs/md2/global.h'\" \(858 characters\) sed "s/^X//" >'tripwire-1.0/sigs/md2/global.h' <<'END_OF_FILE' X/* $Id: global.h,v 1.1.1.2 92/11/02 18:21:18 genek Exp $ */ X X/* GLOBAL.H - RSAREF types and constants X */ X X/* PROTOTYPES should be set to one if and only if the compiler supports X function argument prototyping. X The following makes PROTOTYPES default to 0 if it has not already X been defined with C compiler flags. X */ X X#ifndef PROTOTYPES X#define PROTOTYPES 0 X#endif X X/* POINTER defines a generic pointer type */ Xtypedef unsigned char *POINTER; X X/* UINT2 defines a two byte word */ Xtypedef unsigned short int UINT2; X X/* UINT4 defines a four byte word */ Xtypedef unsigned long int UINT4; X X/* PROTO_LIST is defined depending on how PROTOTYPES is defined above. X If using PROTOTYPES, then PROTO_LIST returns the list, otherwise it X returns an empty list. X */ X#if PROTOTYPES X#define PROTO_LIST(list) list X#else X#define PROTO_LIST(list) () X#endif END_OF_FILE if test 858 -ne `wc -c <'tripwire-1.0/sigs/md2/global.h'`; then echo shar: \"'tripwire-1.0/sigs/md2/global.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/sigs/md2/global.h' fi if test -f 'tripwire-1.0/configs/conf-epix.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-epix.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-epix.h'\" \(844 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-epix.h' <<'END_OF_FILE' X/* $Id: conf-epix.h,v 1.1.1.3 92/11/03 15:37:47 genek Exp $ */ X X/* X * conf-umips.h X * X * Tripwire configuration file X * X */ X X/*** X *** Operating System specifics X *** X *** If the answer to a question in the comment is "Yes", then X *** change the corresponding "#undef" to a "#define" X ***/ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#define SYSV 4 X X/* X * does your system have a like System V? X */ X X#define MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#undef STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#define DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#define STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#define GETHOSTNAME X END_OF_FILE if test 844 -ne `wc -c <'tripwire-1.0/configs/conf-epix.h'`; then echo shar: \"'tripwire-1.0/configs/conf-epix.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-epix.h' fi if test -f 'tripwire-1.0/configs/conf-osx-ucb.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-osx-ucb.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-osx-ucb.h'\" \(806 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-osx-ucb.h' <<'END_OF_FILE' X/* $Id: conf-osx-ucb.h,v 1.1.1.3 92/11/03 15:38:36 genek Exp $ */ X X/* X * conf-osx-ucb.h X * X * Tripwire configuration file for Pyramid's OSx and ucb universe X * X * Ken McDonell X * Pyramid Technology X * X */ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#undef SYSV X X/* X * does your system have a like System V? X */ X X#undef MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#undef STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X * -- yes, but we do not have a to #include X */ X X#undef DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#undef STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#define GETHOSTNAME END_OF_FILE if test 806 -ne `wc -c <'tripwire-1.0/configs/conf-osx-ucb.h'`; then echo shar: \"'tripwire-1.0/configs/conf-osx-ucb.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-osx-ucb.h' fi if test -f 'tripwire-1.0/man/sigfetch.8' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/man/sigfetch.8'\" else echo shar: Extracting \"'tripwire-1.0/man/sigfetch.8'\" \(761 characters\) sed "s/^X//" >'tripwire-1.0/man/sigfetch.8' <<'END_OF_FILE' X.\" $Id: sigfetch.8,v 1.1.1.2 92/11/02 18:20:10 genek Exp $ X.\" X.TH SIGFETCH 8 "October 14, 1992" X.SH NAME Xsigfetch \- signature gathering routine for Tripwire X.SH SYNOPSIS X.B sigfetch Xsigfetch [-0123456789aqv] [ X.I file X\&... ] X.SH DESCRIPTION X.LP X\fIsigfetch\fP is a utility that fetches signatures used by Tripwire. X.SH OPTIONS X.LP XWhen run without any arguments, \fIsigfetch\fP collects all the signatures Xon the specified files in a verbose manner. X.TP X.B \-a XCollect all signatures. X.TP X.B \-q XQuiet mode. Prints out all signatures in one line with no extraneous Xinformation. X.TP X.B \-v XVerbose mode. (default) X.TP X.B \-[0-9] XSeletively collects specified signature number. X.SH AUTHORS X.nf XGene Kim XPurdue University Xgenek@mentor.cc.purdue.edu X.fi X X END_OF_FILE if test 761 -ne `wc -c <'tripwire-1.0/man/sigfetch.8'`; then echo shar: \"'tripwire-1.0/man/sigfetch.8'\" unpacked with wrong size! fi # end of 'tripwire-1.0/man/sigfetch.8' fi if test -f 'tripwire-1.0/configs/conf-osx-att.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/conf-osx-att.h'\" else echo shar: Extracting \"'tripwire-1.0/configs/conf-osx-att.h'\" \(755 characters\) sed "s/^X//" >'tripwire-1.0/configs/conf-osx-att.h' <<'END_OF_FILE' X/* $Id: conf-osx-att.h,v 1.1.1.3 92/11/03 15:38:22 genek Exp $ */ X X/* X * conf-osx-att.h X * X * Tripwire configuration file for Pyramid's OSx and att universe X * X * Ken McDonell X * Pyramid Technology X * X */ X X/* X * is your OS a System V derivitive? if so, what version? X * (e.g., define SYSV 4) X */ X X#define SYSV 3 X X/* X * does your system have a like System V? X */ X X#define MALLOCH X X/* X * does your system have a like POSIX says you should? X */ X X#undef STDLIBH X X/* X * does your system use readdir(3) that returns (struct dirent *)? X */ X X#define DIRENT X X/* X * is #include ok? (as opposed to ) X */ X X#undef STRINGH X X/* X * does your system have gethostname(2) (instead of uname(2))? X */ X X#undef GETHOSTNAME END_OF_FILE if test 755 -ne `wc -c <'tripwire-1.0/configs/conf-osx-att.h'`; then echo shar: \"'tripwire-1.0/configs/conf-osx-att.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/conf-osx-att.h' fi if test -f 'tripwire-1.0/aux/ntohl.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/aux/ntohl.h'\" else echo shar: Extracting \"'tripwire-1.0/aux/ntohl.h'\" \(741 characters\) sed "s/^X//" >'tripwire-1.0/aux/ntohl.h' <<'END_OF_FILE' X#if BYTEORDER == 0x4321 X X#define ntohl(x) X#define htonl(x) X#else X#if ((BYTEORDER - 0x1111) & 0x444) || !(BYTEORDER & 0xf) X#define ntohl(x) fatal("Unknown BYTEORDER\n") X#define htonl(x) fatal("Unknown BYTEORDER\n") X#else X#define BYTEREVERSE(x) {register unsigned char __t, \ X *__c = (unsigned char *) &(x); \ X __t = __c[3]; __c[3] = *__c; *__c++ = __t; \ X __t = *__c; *__c = __c[1]; *++__c = __t; } X#define ntohl(x) BYTEREVERSE(x) X#define htonl(x) BYTEREVERSE(x) X#endif X#endif X X X/* $Id: ntohl.h,v 1.2 92/11/03 02:48:31 genek Exp $ X XThen, wherever you use the value, replace: X Xi = ntohl(j); X -with- Xi = j; Xntohl(i); X XThe resulting code will be faster that using a subroutine, X especially if these routines are called often. X X--spaf X*/ END_OF_FILE if test 741 -ne `wc -c <'tripwire-1.0/aux/ntohl.h'`; then echo shar: \"'tripwire-1.0/aux/ntohl.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/aux/ntohl.h' fi if test -f 'tripwire-1.0/aux/byteorder.c' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/aux/byteorder.c'\" else echo shar: Extracting \"'tripwire-1.0/aux/byteorder.c'\" \(687 characters\) sed "s/^X//" >'tripwire-1.0/aux/byteorder.c' <<'END_OF_FILE' X#ifndef lint Xstatic char rcsid[] = "$Id: byteorder.c,v 1.1.1.2 92/11/02 18:16:38 genek Exp $"; X#endif X X#include "../include/config.h" X#include X#ifdef STDLIBH X#include X#endif X X/* X * byteorder.c X * X * lifted and hacked from Larry Wall's Configure program. X * X * Gene Kim X * Purdue University X * October 14, 1992 X */ X Xmain() X{ X int i; X union { X unsigned long l; X char c[sizeof(long)]; X } u; X X if (sizeof(long) > 4) X u.l = (0x08070605L << 32) | 0x04030201L; X else X u.l = 0x04030201L; X X (void)printf("#define BYTEORDER 0x"); X for (i=0; i < sizeof(long); i++) X (void)printf("%c",u.c[i]+'0'); X (void)printf("\n"); X X exit(0); X /*NOTREACHED*/ X} END_OF_FILE if test 687 -ne `wc -c <'tripwire-1.0/aux/byteorder.c'`; then echo shar: \"'tripwire-1.0/aux/byteorder.c'\" unpacked with wrong size! fi # end of 'tripwire-1.0/aux/byteorder.c' fi if test -f 'tripwire-1.0/contrib/README.chk' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/contrib/README.chk'\" else echo shar: Extracting \"'tripwire-1.0/contrib/README.chk'\" \(622 characters\) sed "s/^X//" >'tripwire-1.0/contrib/README.chk' <<'END_OF_FILE' X# $Id: README.chk,v 1.1.1.2 92/11/02 18:19:03 genek Exp $ X XFrom shabby Sun Sep 27 18:48:33 1992 XReceived: from localhost by mentor.cc.purdue.edu (5.61/Purdue_CC) X id AA10476; Sun, 27 Sep 92 18:48:32 -0500 XMessage-Id: <9209272348.AA10476@mentor.cc.purdue.edu> XTo: genek XSubject: README for tripwire.chk XDate: Sun, 27 Sep 92 18:48:31 -0500 XFrom: shabby XStatus: OR X X X"tripwire.chk" is a COPS-style driver for tripwire. It's laughably Xsimple but I happened to write it, so I thought I would save anyone else Xthe trouble. It should work with the "reconfig" script that COPS uses. X X-Shabbir J. Safdar (shabby@cc.purdue.edu) X END_OF_FILE if test 622 -ne `wc -c <'tripwire-1.0/contrib/README.chk'`; then echo shar: \"'tripwire-1.0/contrib/README.chk'\" unpacked with wrong size! fi # end of 'tripwire-1.0/contrib/README.chk' fi if test -f 'tripwire-1.0/contrib/CheckConfig' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/contrib/CheckConfig'\" else echo shar: Extracting \"'tripwire-1.0/contrib/CheckConfig'\" \(618 characters\) sed "s/^X//" >'tripwire-1.0/contrib/CheckConfig' <<'END_OF_FILE' X#!/bin/sh X# "analyze" a config file X# X# Lance Bailey X# X Xif [ ".$1" = ".-v" ];then verbose="yes";shift Xelse verbose="";fi X Xfile="$1" X Xsed -e "s/#.*//" \ X -e "/^$/d" \ X -e "s=[^/]*\(/[^ ]*\).*=\1=" \ X $file | X while read line X do if [ ! -s $line ];then X if [ $verbose ];then echo ${line}: not found;fi X continue X fi X X case `ls -ld $line` in X d*) if [ $verbose ];then echo "${line}: directory";fi ;; X l*) echo "${line}: symlink";; X *) if [ $verbose ];then echo "${line}: file";fi ;; X esac X done X X# X# EOF X# END_OF_FILE if test 618 -ne `wc -c <'tripwire-1.0/contrib/CheckConfig'`; then echo shar: \"'tripwire-1.0/contrib/CheckConfig'\" unpacked with wrong size! fi chmod +x 'tripwire-1.0/contrib/CheckConfig' # end of 'tripwire-1.0/contrib/CheckConfig' fi if test -f 'tripwire-1.0/include/sigs.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/include/sigs.h'\" else echo shar: Extracting \"'tripwire-1.0/include/sigs.h'\" \(613 characters\) sed "s/^X//" >'tripwire-1.0/include/sigs.h' <<'END_OF_FILE' X/* $Id: sigs.h,v 1.1.1.2 92/11/02 18:19:47 genek Exp $ */ X X/* X * sigs.h X * X * common header definitions for signature wrappers. X * X * Gene Kim X * Purdue University X * October 12, 1992 X */ X X#include X#include X#if !defined(SYSV) || (SYSV > 3) X# include X#else X# include X#endif /* SYSV */ X#if (defined(SYSV) && (SYSV < 3)) X# include X# include X#endif /* SVR2 */ X X#ifndef SEEK_SET X# define SEEK_SET L_SET X#endif X Xchar *ltob64(); Xextern int printhex; X X/* prototypes */ X#ifdef __STDC__ Xint sig_null_get(int, char *, int); X#else Xint sig_null_get(); X#endif END_OF_FILE if test 613 -ne `wc -c <'tripwire-1.0/include/sigs.h'`; then echo shar: \"'tripwire-1.0/include/sigs.h'\" unpacked with wrong size! fi # end of 'tripwire-1.0/include/sigs.h' fi if test -f 'tripwire-1.0/configs/tw.conf.ultrix' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/configs/tw.conf.ultrix'\" else echo shar: Extracting \"'tripwire-1.0/configs/tw.conf.ultrix'\" \(592 characters\) sed "s/^X//" >'tripwire-1.0/configs/tw.conf.ultrix' <<'END_OF_FILE' X# X# Ultrix tw.config file X# John Wagner X# X X/etc/crontab X/etc/disktab X/etc/exports X/etc/fstab X/etc/gettytab X/etc/hosts X/etc/hosts.equiv X/etc/hosts.lpd X/etc/inetd.conf X### Protect these two files if you are X### running ntp: X/etc/ntp.conf X/usr/etc/ntpd X### X/etc/printcap X/etc/rc X/etc/rc.local X/etc/resolv.conf X/etc/sendmail.cf X/etc/services X/etc/svc.conf X/etc/ttys X/usr/etc/fingerd X/usr/etc/mountd X/usr/etc/ftpd X### These files should be protected if you X### have Ultrix Upgraded or Enhanced security X### installed. X/etc/sec/audit_events X/etc/sec/auditd X/etc/sec/auditmask END_OF_FILE if test 592 -ne `wc -c <'tripwire-1.0/configs/tw.conf.ultrix'`; then echo shar: \"'tripwire-1.0/configs/tw.conf.ultrix'\" unpacked with wrong size! fi # end of 'tripwire-1.0/configs/tw.conf.ultrix' fi if test -f 'tripwire-1.0/contrib/TRIPWIRE' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/contrib/TRIPWIRE'\" else echo shar: Extracting \"'tripwire-1.0/contrib/TRIPWIRE'\" \(569 characters\) sed "s/^X//" >'tripwire-1.0/contrib/TRIPWIRE' <<'END_OF_FILE' X#!/bin/sh X# run tripwire from safe sources X# X# Lance Bailey X# X Xumask 077 XHOSTNAME=`hostname` XEXE=tripwires/${HOSTNAME} XDB=Databases/tripwire.database_${HOSTNAME} XSRC=/usr/local/adm/tcheck XWRK=/tmp X Xcd ${WRK} Xrm -rf ./tcheck.run; mkdir tcheck.run; cd tcheck.run;mkdir Databases X Xif [ ! -s ${SRC}/${EXE} ];then echo cannot access ${SRC}/${EXE}; exit-127; fi X Xuncompress <${SRC}/${EXE} > ./tripwire; chmod +x tripwire Xuncompress <${SRC}/${DB} > ./Databases/`basename ${DB}` X X./tripwire $* 2>&1 | mail root Xcd ${WRK} # ;rm -rf tcheck.run X X# X# EOF X# END_OF_FILE if test 569 -ne `wc -c <'tripwire-1.0/contrib/TRIPWIRE'`; then echo shar: \"'tripwire-1.0/contrib/TRIPWIRE'\" unpacked with wrong size! fi chmod +x 'tripwire-1.0/contrib/TRIPWIRE' # end of 'tripwire-1.0/contrib/TRIPWIRE' fi if test -f 'tripwire-1.0/aux/Makefile' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/aux/Makefile'\" else echo shar: Extracting \"'tripwire-1.0/aux/Makefile'\" \(492 characters\) sed "s/^X//" >'tripwire-1.0/aux/Makefile' <<'END_OF_FILE' X# $Id: Makefile,v 1.1.1.2 92/11/02 18:16:34 genek Exp $ X# X# Tripwire aux program build X# X XBORDER = ../include/byteorder.h XINODE = ../include/inode.h X Xall: $(BORDER) $(INODE) X X$(BORDER): byteorder.c ntohl.h X $(CC) $(CFLAGS) $(LDFLAGS) byteorder.c -o byteorder X (./byteorder; cat ./ntohl.h) > $(BORDER) X X$(INODE): types.sh types.c types X $(SHELL) ./types.sh "$(CPP)" > $(INODE) X Xtypes: types.c X $(CC) $(CFLAGS) $(LDFLAGS) types.c -o types X Xclean: X rm -f types byteorder *.o core ourtypes.h X END_OF_FILE if test 492 -ne `wc -c <'tripwire-1.0/aux/Makefile'`; then echo shar: \"'tripwire-1.0/aux/Makefile'\" unpacked with wrong size! fi # end of 'tripwire-1.0/aux/Makefile' fi if test -f 'tripwire-1.0/TODO' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/TODO'\" else echo shar: Extracting \"'tripwire-1.0/TODO'\" \(485 characters\) sed "s/^X//" >'tripwire-1.0/TODO' <<'END_OF_FILE' X# $Id: TODO,v 1.4 92/11/03 13:34:56 genek Exp $ X Xfirst net release Xv1.0: Tue Nov 3 04:37:39 EST 1992 X X fix byte "mangling" on MD2, MD4 and Snefru for Cray machines X fix lurking bug that surfaces in ETA-10 versions X find out why malloc() sometimes fails in Cray versions X X regular expression handling in tw.config file X hook for tar and cpio file parsing X inclusion of complete and authorative documentation X add "information mode" that explains inode fields X END_OF_FILE if test 485 -ne `wc -c <'tripwire-1.0/TODO'`; then echo shar: \"'tripwire-1.0/TODO'\" unpacked with wrong size! fi # end of 'tripwire-1.0/TODO' fi if test -f 'tripwire-1.0/contrib/tripwire.chk' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/contrib/tripwire.chk'\" else echo shar: Extracting \"'tripwire-1.0/contrib/tripwire.chk'\" \(458 characters\) sed "s/^X//" >'tripwire-1.0/contrib/tripwire.chk' <<'END_OF_FILE' X# $Id: tripwire.chk,v 1.1.1.2 92/11/02 18:19:12 genek Exp $ X# X# tripwire.chk - S.J. Safdar (shabby@cc.purdue.edu) X# Provide a cops-style interface to tripwire. X# Xumask 077 X XTEST=/bin/test XECHO=/bin/echo X Xif $TEST ! -f ./tripwire ; then X $ECHO "Tripwire not compiled here, exiting."; Xfi X Xif $TEST ! -d ./Databases ; then X mkdir ./Databases X ./tripwire -initialize X exit 0 Xfi X Xif $TEST ! -f ./Databases/tw.* ; then X ./tripwire -initialize Xelse X ./tripwire Xfi X END_OF_FILE if test 458 -ne `wc -c <'tripwire-1.0/contrib/tripwire.chk'`; then echo shar: \"'tripwire-1.0/contrib/tripwire.chk'\" unpacked with wrong size! fi chmod +x 'tripwire-1.0/contrib/tripwire.chk' # end of 'tripwire-1.0/contrib/tripwire.chk' fi if test -f 'tripwire-1.0/tests/Makefile' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/tests/Makefile'\" else echo shar: Extracting \"'tripwire-1.0/tests/Makefile'\" \(280 characters\) sed "s/^X//" >'tripwire-1.0/tests/Makefile' <<'END_OF_FILE' X# $Id: Makefile,v 1.1.1.2 92/11/02 18:23:47 genek Exp $ X# X# Tripwire test X XDIST=tripwire-0.92 X Xall: ../src/tripwire X @HOST=`echo $(HOSTNAME)`; \ X CURRPATH=`pwd`; \ X $(SHELL) test1.sh $(HOSTNAME) $(DIST) X X../src/tripwire: X (cd ..; make all) X Xclean: X rm -f tw.db_TEST.@ @tw.config END_OF_FILE if test 280 -ne `wc -c <'tripwire-1.0/tests/Makefile'`; then echo shar: \"'tripwire-1.0/tests/Makefile'\" unpacked with wrong size! fi # end of 'tripwire-1.0/tests/Makefile' fi if test -f 'tripwire-1.0/sigs/snefru/Makefile' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/sigs/snefru/Makefile'\" else echo shar: Extracting \"'tripwire-1.0/sigs/snefru/Makefile'\" \(246 characters\) sed "s/^X//" >'tripwire-1.0/sigs/snefru/Makefile' <<'END_OF_FILE' X# $Id: Makefile,v 1.1.1.2 92/11/02 18:22:37 genek Exp $ X# X# Makefile for snefru wrapper X# X# Gene Kim X# Purdue University X# October 18, 1992 X# X Xall: snefru.o X X.c.o: X $(CC) $(CFLAGS) -c $< X Xclean: X -rm -rf *.o X Xsnefru.o: ../../include/byteorder.h END_OF_FILE if test 246 -ne `wc -c <'tripwire-1.0/sigs/snefru/Makefile'`; then echo shar: \"'tripwire-1.0/sigs/snefru/Makefile'\" unpacked with wrong size! fi # end of 'tripwire-1.0/sigs/snefru/Makefile' fi if test -f 'tripwire-1.0/sigs/crc32/Makefile' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/sigs/crc32/Makefile'\" else echo shar: Extracting \"'tripwire-1.0/sigs/crc32/Makefile'\" \(238 characters\) sed "s/^X//" >'tripwire-1.0/sigs/crc32/Makefile' <<'END_OF_FILE' X# $Id: Makefile,v 1.1.1.2 92/11/02 18:20:54 genek Exp $ X# X# Makefile for crc32 wrapper X# X# Gene Kim X# Purdue University X# October 18, 1992 X# X Xall: crc32.o X X.c.o: X $(CC) $(CFLAGS) -c $< X Xclean: X -rm *.o X Xcrc32.o: ../../include/byteorder.h END_OF_FILE if test 238 -ne `wc -c <'tripwire-1.0/sigs/crc32/Makefile'`; then echo shar: \"'tripwire-1.0/sigs/crc32/Makefile'\" unpacked with wrong size! fi # end of 'tripwire-1.0/sigs/crc32/Makefile' fi if test -f 'tripwire-1.0/sigs/crc/Makefile' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/sigs/crc/Makefile'\" else echo shar: Extracting \"'tripwire-1.0/sigs/crc/Makefile'\" \(238 characters\) sed "s/^X//" >'tripwire-1.0/sigs/crc/Makefile' <<'END_OF_FILE' X# $Id: Makefile,v 1.1.1.2 92/11/02 18:20:32 genek Exp $ X# X# Makefile for crc32 wrapper X# X# Gene Kim X# Purdue University X# October 18, 1992 X# X Xall: crc.o X X.c.o: X $(CC) $(CFLAGS) -c $< X Xclean: X -rm -rf *.o X Xcrc.o: ../../include/byteorder.h END_OF_FILE if test 238 -ne `wc -c <'tripwire-1.0/sigs/crc/Makefile'`; then echo shar: \"'tripwire-1.0/sigs/crc/Makefile'\" unpacked with wrong size! fi # end of 'tripwire-1.0/sigs/crc/Makefile' fi if test -f 'tripwire-1.0/man/Makefile' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'tripwire-1.0/man/Makefile'\" else echo shar: Extracting \"'tripwire-1.0/man/Makefile'\" \(176 characters\) sed "s/^X//" >'tripwire-1.0/man/Makefile' <<'END_OF_FILE' X# Makefile for man pages X Xall: X $(INSTALL) -m 644 sigfetch.8 $(MANDIR)/man8 X $(INSTALL) -m 644 tripwire.8 $(MANDIR)/man8 X $(INSTALL) -m 644 tw.config.5 $(MANDIR)/man5 X Xclean: X END_OF_FILE if test 176 -ne `wc -c <'tripwire-1.0/man/Makefile'`; then echo shar: \"'tripwire-1.0/man/Makefile'\" unpacked with wrong size! fi # end of 'tripwire-1.0/man/Makefile' fi echo shar: End of archive 8 \(of 8\). cp /dev/null ark8isdone MISSING="" for I in 1 2 3 4 5 6 7 8 ; do if test ! -f ark${I}isdone ; then MISSING="${MISSING} ${I}" fi done if test "${MISSING}" = "" ; then echo You have unpacked all 8 archives. echo "Now read the README file" rm -f ark[1-9]isdone else echo You still need to unpack the following archives: echo " " ${MISSING} fi ## End of shell archive. exit 0 -- Gene Spafford Software Engineering Research Center & Dept. of Computer Sciences Purdue University, W. Lafayette IN 47907-1398 Internet: spaf@cs.purdue.edu phone: (317) 494-7825